HVAC Error Codes & Diagnosis Guide
Understanding HVAC error codes is the first step to getting your system back up and running. This guide covers common error codes for mini splits, heat pumps, and central air systems.

Common Error Codes
| Code | Meaning | Common Fix |
|---|---|---|
| E1 | Indoor/outdoor communication error | Check wiring connections between units |
| E2 | Indoor coil temperature sensor fault | Replace temperature sensor / check control board |
| E3 | Outdoor coil temperature sensor fault | Replace outdoor sensor |
| E5 | Compressor overcurrent protection | Check compressor; may need replacement |
| F1 | High pressure protection activated | Clean condenser coils, check refrigerant levels |
| F2 | Low pressure protection activated | Check for refrigerant leaks |
| H6 | Compressor position detection error | Replace compressor or inverter board |
How to Read Your Error Code
- 1
Locate the display
Check the LED display on your indoor unit or the blinking pattern on your outdoor unit's LED indicator.
- 2
Record the code
Write down the exact code shown (e.g., E1, F2, H6) along with any blinking patterns.
- 3
Cross-reference with your manual
Check the error code table in your unit's manual, or refer to the table above for common codes.
- 4
Find the right part
Once you know the issue, use our Parts Finder to locate the exact replacement part for your system.
Need Help Diagnosing Your System?
Our HVAC experts can help you identify the right replacement part. Call us or use our Parts Finder tool.